Schroth B24 is the most economical bolt-in bracket offered. It's a heavy-duty steel bracket that cannot be bent to aid installation.
Dimensions are 5mm thick, 69x46mm with a 13mm (1/2”) bolt hole.
There is a slight 10° bend so that this bracket can be bolted directly to any flat surface and leave room for the webbing to have been wrapped into it. It can be sewn in or wrapped in, with an LV4 (recommended), LV10 or LV11. It cannot be used for a lap belt, bolt-in bracket. Under SFI 16.5 regulations, 3” webbing must be folded at the edges for use with this bracket.
FIA & SFI 16.1 Approved
** CANNOT BE USED WITH FIA 8853-2016 HARNESSES **
