0 items in your basket. TOTAL: £0.00

View Basket My Account


Useful Info


Change Language

Your Recent Products

Super B Voltage Variation Protector

£125.00  Excl VAT

Return to last category
Super B Voltage Variation Protector Features (SB-BDB-250)

Protects Lithium Batteries from Voltage Surges
Solid State, Sealed Construction
LED Status Light
Programmable Reset
People Who Bought This Item Also Bought

Steel Side M

Radio Cable

TR1 Seat Adj

570 Series F

Tech 1-Z Rac

Roll Over Ve


super B external under and overvoltage protector, to secure super B tractions batteries against under- and overvoltage with the lowest possible stand-by current.

Before the BDB-250 becomes operational, it has to determine if a 12V or a 24V system is connected. This means that after connecting the BDB-250, the first thing it does is wait a second before doing anything else. After this, if the input voltage is above 10.0V below and 15.4V, the relay will close. If these conditions are not met, the relay will open.

High voltage
If the input voltage rises above 15.0V, the LED will start blinking to indicate a detected overvoltage. This will continue for 90 seconds after which the relay will be opened and the LED will turn off.
When the voltage rises above 15.4V, the entire “warning” process will be skipped and the relay will switch off immediately.

Low voltage
If the input voltage drops below 10.0V, the LED will blink to indicate an under-voltage situation. This will continue for 90 seconds after which the relay will be opened and the LED will turn off.

When the BDB-250 is switched off and the voltage returns between 11.0V and 14.0V, there are two ways to re-activated it.
If the user has chosen the automatic reset function, the relay of the BDB-250 will be activated directly after a “correct” voltage has been measured. However, when the manual reset function has been programmed, the user has to reset the BDB-250 by hand. This is done by pressing the build-in switch. If an external switch is connected to the remote input, this can also be used to reset it manually. The manner in which the BDB-250 will be reset is programmable by the user. The manner in which this is done can be found under “Programming”

The user can choose if the BDB-250 is reset manually of automatically. This is done by pressing the programming button and holding it down until the LED flashes. This indicates that the BDB-250 is in programming mode. At this point the button must be released.
When the button is pressed once now, the automatic reset function is selected. If the user presses the button twice, the manual reset is selected.
Approximately 4 seconds after the last time the button is pressed, the LED will blink to show the programmed reset function. (e.g.: If position 2 – manual reset – is selected, the LED will blink twice.)

© 2018 MSAR Ltd, 273 Kirkdale, Sydenham, London, SE26 4QD | Visit our London showroom SE26 4QD

Returns and Refunds | Terms and Conditions | Data Protection and Privacy |

HANS Stress Data | Neck Tension Comparison Chart | FIA Hans Guide | HANS Instruction Manual | HANS Owners Manual (USA) | Harness User Guide | Adjustment ranges of restraints | Webbing Information | RFR™ Rotary Buckle | ASM - anti submarining | Flexi Belt System | Hybrid Restraints | UVEX Hearing Protection | Slip Stop | Links | MSAR Blog / News | SCHROTH Training #1 How to Wrap Your Harnesses Correctly | SCHROTH Training #2 Lap Belt Specifics | SCHROTH Training #3 Flexi Laps in HD | SCHROTH Training #4 B23C Hardware in HD! | SCHROTH Training #5 B63 and B40 Hardware in HD! | SCHROTH Training #6 "Back to Basics" Belt Adjusters and Camlocks | Arai UK - Motorsport Helmet Standards Explained | A Drivers Guide to Safer Motorsport | ATL - What to think about before you call | Frontal Head Restraints (HANS) to be mandatory from 2016 | FIA Appendix J to the International Sporting Code - Article 253 Safety Equipment 2017 | FIA Appendix K to the International Sporting Code 2017 | MSA Blue Book 2017 - Section K Competitor Safety | MSA ROPS bulletin March 2011 | MSA Frontal Head Restraints (FHRs) bulletin October 2015 | MSA Rule Changes bulletin October 2017 | MSA (Abridged) ROPS bulletin October 2017 |