Schroth B24 is the most economical bolt-in bracket offered. It's a heavy-duty steel bracket that cannot be bent to aid installation.
Dimensions are 5mm thick, 69x46mm with a 13mm (1/2”) bolt hole.
There is a slight 10° bend so that this bracket can be bolted directly to any flat surface and leave room for the webbing to have been wrapped into it. It can be sewn-in or wrapped-in, with an LV4 (recommended), LV10 or LV11.
It cannot be used for a lap belt, bolt-in bracket, under SFi 16.5 regulations, 3” webbing must be folded at the edges for use with this bracket.
FiA & SFi 16.1 approved
* CANNOT BE USED WITH FiA 8853-2016 HARNESSES *
- Genuine Schroth components
- Can be used with 2" or 3" belts
- FiA 8853-2016 harnesses are NOT compatible
