Aim EVO 5 car racing data logger, is the evolution of the traditional data logger, that over the years has become a standard defacto data acquisition system, used in a huge number of racing championships.
Wide Range of Sources for your Data
The EVO 5 samples all the information you need, data coming from your vehicle's ECU via CAN, RS232 or K-line, from the internal accelerometers and gyro and from the GPS08 Module included in the kit. Also from analog/digital inputs, external expansions as well as predefined math channels. Sensors can be connected to 8 configurable analog channels, to the RPM input and to 4 wheel speed inputs.
Two Digital Outputs
The EVO 5 features two digital outputs (Dout), which are LOW SIDE type (switch to ground), which can be configured in order to be turned on/off depending on the value of the analog or digital inputs. They permit to automatically run external systems, i.e. to switch on/off additional lights, to activate/de-activate a cooling fan or circulation pumps, etc when a certain event happens.
CAN Output
With the CAN Output you can send messages directly to an existing CAN network in order to improve the range of vehicle control possibilities.
Internal SD Card
The internal SD card allows you to record all possible data you may ever need. The card is protected by a waterproof door, equipped with a sensor, closing all files when you open it, to prevent any data loss possibility. No way to have faster data downloading: you remove the SD and it is done.
Wi-Fi Connection
Configure the system and download your data over a secure 802.11 WiFi connection, even if your car is 100 meters far from you.
Two Multi-Channel Motorsport Connectors
Simple and straightforward, one top quality harness for ALL your connections. A 37 pin connector for main applications (power, CAN, Aim CAN network, etc.) and a 22 pins connector for additional functions like CAN2, digital outputs.
Priced Each
